Welcome to Elekitsorparts Store
  • 1
  • 40dB att
  • 6dB att
  • 0dB att

1~600MHz 6dB/40dB RF Attenuator

1~600MHz 6dB/40dB RF Attenuator for Ham Radio and Electronic Makers used in Spectrum Analyzer or Sweep Generator

  • Description
  • Additional Information

Product Description

Note: This kit does not contain the Antenna, Power Supply, Coax, Stereo Cable, the Dummy Load and some others parts,  which may be used in this FM transmitter project.  You may contact us for the info of other parts needed.

The EKP-H150210-MATT 6dB/40dB RF Attenuator is a calibrated RF attenuator designed for calibrating your spectrum analyzer or your homebrew RF wobbler such as NWT series. RF attenuators reduce the level of RF signal. This attenuation may be required to protect a circuit stage from receiving a signal level that is too high. Also an attenuator may be used to provide an accurate impedance match as most fixed attenuators offer a well-defined impedance, or attenuators may be used in a variety of areas where signal levels need to be controlled.


  • RF Frequency Range: 1 ~ 600MHz main view
  • Impedance: 50 OHM
  • RF Connector: SMA
  • Attenuation: 6dB/40dB
  • Max RF Power IN: +10 dBm
  • Size: 38×39 (mm), 1.5 x1.5 (inch)

 Note: All specifications are subject to change without notice or obligation   


  • 6dB & 40dB RF Attenuator (Part No.: EKP-H150210-MATT) x 1


  • For Eu buyers, the VAT is included in the shipping charge


We warrant all products against defects in material for a period of 1 year unless otherwise indicated.The warranty does not cover damage, improper use, abuse, or conditions beyond our control (i.e. lightning).

Additional Information

Weight 0.25 kg
Dimensions 100 x 120 x 150 mm